Emission characteristics of condensable particulate matter during the production of solid waste-based sulfoaluminate cement: Compositions, heavy metals, and preparation impacts.

Recycling solid waste for preparing sulfoaluminate cementitious materials (SACM) represents a promising approach for low-carbon development. There are drastic physical-chemical reactions during SACM calcination. However, there is a lack of research on the flue gas pollutants emissions from this process. Condensable particulate matter (CPM) has been found to constitute the majority of the primary PM emitted from various fuel combustion. In this study, the emission characteristics of CPM during the calcination of SACM were determined using tests in both a real-operated kiln and laboratory experiments. The mass concentration of CPM reached 96.6 mg/Nm3 and occupied 87% of total PM emission from the SACM kiln. Additionally, the mass proportion of SO42- in the CPM reached 93.8%, thus indicating that large quantities of sulfuric acid mist or SO3 were emitted. CaSO4 was one key component for the formation of main mineral ye'elimite (3CaO·3Al2O3·CaSO4), and its decomposition probably led to the high SO42- emission. Furthermore, the use of CaSO4 as a calcium source led to SO42- emission factor much higher than conventional calcium sources. Higher calcination temperature and more residence time also increased SO42- emission. The most abundant heavy metal in kiln flue gas and CPM was Zn. However, the total condensation ratio of heavy metals detected was only 40.5%. CPM particles with diameters below 2.5 µm and 4-20 µm were both clearly observed, and components such as Na2SO4 and NaCl were conformed. This work contributes to the understanding of CPM emissions and the establishment of pollutant reduction strategies for waste collaborative disposal in cement industry.

Thermal co-treatment of aluminum dross and municipal solid waste incineration fly ash: Mineral transformation, crusting prevention, detoxification, and low-carbon cementitious material preparation.

Harmless disposal and resource utilization of hazardous industrial wastes has become an important issue with the green development of human society. However, resource utilization of hazardous solid wastes, such as the production of cementitious materials, is usually accompanied by a pretreatment process to remove adverse impurities that contaminate the final product. In this study, aluminum dross (AD) was thermally co-treated with another hazardous waste, municipal solid incineration fly ash (MSWI-FA), to synergistically solidify F and Na, control leaching of heavy metals, and remove chloride impurities. Significant crusting was observed when AD was thermally treated by itself, but not when AD and MSWI-FA were thermally co-treated. In the process of co-thermal treatment, the remaining Cl, Na, and K contents were reduced to as low as 0.3%, 1.8%, and 0.6%, respectively. CaO and SiO2 in MSWI-FA reacted with Na3AlF6 and Al2O3 in AD, and formed CaF2 and Na6(AlSiO4)6, which contributed to the prevention of crusting and limited the leaching concentrations of F and Na to below detection thresholds and 270.6 mg/L, respectively. In addition, heavy metals were well solidified, and dioxins were fully decomposed during thermal treatment. Finally, a sulfoaluminate cementitious material (SACM) with high early- and later-age strengths was successfully created via synergetic complementarity using thermally co-treated AD and MSWI-FA together with other solid wastes. Collectively, this study outlines a promising method for the efficient and sustainable utilization of AD and MSWI-FA.

[Enzyme activities in nitrogen metabolism of winter wheat and its grain quality under different environmental conditions].

The study with three wheat cultivars grown in two places of Shandong Province showed that the nitrate reductase (NR) and glutamine synthetase (GS) activities in flag leaf and the GS activity in grain were in the sequence of Jimai 20 > Youmai 3 > PH971942, and higher in Longkou than in Taian. The strong gluten wheat cultivars in Longkou had better grain qualities than those in Taian. There were significant correlations between the environmental factors at grain-filling stage and the grain qualities and enzyme activities of wheat. Higher temperature, moderate drought and less sunshine at grain filling stage were benefit to the grain qualities. The protein content of grain was positively correlated with the NR and GS activities in flag leaf for the medium and strong gluten wheat cultivars in Longkou and for the medium gluten wheat cultivars in Taian. Wheat cultivars for different use needed different environmental conditions, while suitable environmental conditions could promote the enzyme activities in nitrogen metabolism of wheat, and thus, improve the qualities of wheat grain.